Scan the QR code to open this guide on your phone.
Installation
KlickDok is designed for quick self-installation. No tools needed beyond a screw and plug — all included.
Near the charging station, in the hallway or utility room — wherever you store the vacuum. Mark the screw hole with the included template.
Drill a 6mm hole, insert the included plug and screw the KlickDok firmly to the wall. Check that the bracket is level.
Click the Samsung Jet 75 attachments into the hooks. Done. All accessories hang neatly and are instantly accessible.
Every KlickDok comes with everything you need for installation. You only need a drill and a 6mm drill bit.
KlickDok works on concrete, brick, aerated concrete and wooden walls. For plasterboard walls, use a dedicated plasterboard anchor (not included) for sufficient load-bearing capacity.
Hang the KlickDok at a height of roughly 120-150 cm. This way you can easily grab and replace the accessories without bending or reaching.
The ideal spot is next to the Samsung charging dock. This keeps the vacuum and all attachments in the same location. Vacuuming becomes a matter of grab and go.
Yes. Unscrew the mount and install it at a new location. You will need a new drill hole. The old hole can be filled with a bit of filler.
The Samsung Jet 75 accessories together weigh less than 500 grams. With the included screw and plug, the wall load is minimal — comparable to a light picture frame.
KlickDok is specifically designed for the Samsung Jet 75E Pro (VS20B75ADR5). Other models in the Jet series have different accessory dimensions and may not fit exactly.
The KlickDok Double Mount fits the standard included accessories of the Samsung Jet 75E Pro:
Scan the QR code to open this guide on your phone.